Products

At Virginia Foam Insulators we offer the most advanced money-saving insulation products on the market for residential and commercial projects. With Virginia Foam, you can trust you are receiving the highest quality systems at the most affordable rate. Our insulation products can increase the structural integrity of your building, as well as result in optimum insulation efficiency and energy savings. Whether you need an energy audit or a product that's soundproof and resistant to the most severe weather conditions, we've got you covered.

Can't find what you're looking for? Check out our services.

Please contact us with any questions you may have.

Open Cell Insulation

Like a thick foam cushion, Open-Cell Polyurethane Spray Foam can insulate not only for air, but for sound as well. Unlike the denser, Closed-Cell insulating foam, Open-Cell bubbles burst allowing air to enter into its many pockets. This cushy, pillow-like material deadens sound on impact and keeps air right where you want it. Upon spraying, Open-Cell foam expands up to 150 times its original liquid volume, filling in all the cracks and crevices of your wall cavity. After spraying, any excess foam is shaved off the studs creating a flat surface for drywall installation. Offering an R-value of 3.7+ per inch, this product requires just five inches of thickness to create a complete air barrier in your home's most porous areas.

Besides being a great insulator spray insulation for all walls of a house, Open-Cell is effective as a sound proofing material for media rooms and home recording studios. Open-Cell foam may also be direct sprayed to roof decks.

PSP FS50 Open Cell

Advantages

- Seamless Protective Building Envelope

- Eliminate Air Infiltration

- Excellent Adhesion

- Energy Savings

- Avoids Thermal Bridging

- Meets UL Class 1 Requirements

- Provides a Continuous Air Barrier

- Reduce/Eliminate Convection Currents within Walls

Recommended Product Applications

- Walls

- Floors

- Unvented Crawl Spaces

- Unvented Attics

- Vented Attics

- Vented Crawl Spaces

- Ceilingsaces

- Ceilings

Closed Cell Insulation

Closed-Cell Polyurethane Foam is our top selling product at Virginia Foam Insulators. Closed-cell foam is a sticky plastic that expands up to 30 times its liquid volume when sprayed, allowing it to produce an R-value per inch of 6.4+. Because of its high R-value - the unit of measurement for foam resistance and heat flow - closed-cell spray foam insulation is the best insulating product on the market today. As the plastic is sprayed, cells or bubbles in the foam are compacted together and filled with an inert gas, making the foam as dense and insulating as possible. You can see an example of this type of foam insulation keeping the air cold in your home refrigerator or freezer.

Along with its high R-value, closed-cell spray foam insulation is incredibly strong, durable and resistant to the leakage of air or water vapor. Its high density and durability make closed-cell spray foam ideal for windy, damp and water-prone locations. Customers living in coastal regions or areas of high wind or cold should consider this the product of choice. This is also the ideal insulation for crawlspaces and other damp locations. While more expensive than open-cell spray foam, at the right thickness and with proper insulation, closed-cell foam will act as an air and vapor barrier and improve the structural integrity of your home.

PSP FS210 Closed Cell

Advantages

- Seamless Protective Building Envelope

- Moisture and Vapor Barrier

- Eliminate Air Infiltration

- Excellent Adhesion

- Highest R-value

- Energy Savings

- Avoids Thermal Bridging

- Meets UL Class 1 Requirements

- Provides a Continuous Air Barrier

- Reduce/Eliminate Convection Currents within Walls

Advantages

- Seamless Protective Building Envelope

- Moisture and Vapor Barrier

- Eliminate Air Infiltration

- Excellent Adhesion

- Highest R-value

- Energy Savings

- Avoids Thermal Bridging

- Meets UL Class 1 Requirements

- Provides a Continuous Air Barrier

- Reduce/Eliminate Convection Currents within Walls

Fiberglass - Blown-in, Batts and Rolls

Along with our foam and foam insulation products, Virginia Foam Insulators also offers the latest in Faced, Non-Faced, and blown Formaldehyde-free Fiberglass Insulation from Johns Manville and Guardian.

With various densities, widths and lengths to accommodate any space, these products can be rolled and attached to any wall cavity or new construction project. We recommend pairing Fiberglass products with our Closed-Cell Polyurethane Spray Foam, creating a more consistent air barrier and a higher R-value, meeting local code requirements and saving money in the process.

Blown in Blanket (BIB) or Mesh Net & Blown Fiberglass

While providing the best foam insulation available today, Virginia Foam also specializes in the install of the Blown in Blanket (BIB) insulation system by Guardian. Perfect for the residential and light commercial construction markets, this application system uses netting and formaldehyde-free white blowing Fiberglass and can be installed in wall, floor and ceiling cavities. With the BIB system the entire cavity can be filled with energy-saving insulation. As the insulation is blown into the cavity, it fills all crevices and areas not normally filled with standard batt insulation. Blown-in Fiberglass creates a more complete barrier to heat and cold, in addition to reducing noise transfer. With the BIB system, walls and ceilings of any slope and size can be fully insulated. The BIB insulation system is installed using a two-step process. The walls are covered with heavy-duty, spun bond netting. The cavity is then filled with the blown Fiberglass. Drywall can be installed over the insulated wall the same day.

Virginia Foam Insulators uses the latest in BIB insulation from Guardian. Guardian's Perfect Fill is GREENGUARD® certified for Children & Schools. GREENGUARD® certified products significantly reduce the existence of hazardous emissions and promote healthy home and school environments.

Dense-Packed Blown Fiberglass

Virginia Foam Insulators uses the term "Dense Packed" to refer to when we install Fiberglass at densities approaching 4.0 lbs./ft3. Depending on the installation approach used, typical Fiberglass has a density of between 1.5 lbs./ft3. and 3.0 lbs./ft3. Dense Packed Fiberglass insulation is used in the retrofit market where it is installed by removing pieces of siding or roofing from poorly insulated or older homes. Holes are strategically drilled horizontally across the structural surface of the home so that the holes are centered in each framing cavity. Insulation is then blown via a hose into the holes filling the cavity.

Virginia Foam Insulators uses the latest in Fiberglass from Guardian for our Dense Pack jobs. Guardian's product is a high quality Fiberglass insulation used in new construction or retrofit markets. Guardian is designed to be blown dry into structural cavities.

Cotton Fiber Batts

From soundproofing to maximum thermal performance, cotton fiber insulation provides many uses to home construction professionals. That's why Virginia Foam Insulators carries the latest in recycled Cotton Fiber insulation from Bonded Logic. Bonded Logic's UltraTouch insulation is made from natural cotton fibers with no chemical irritants and requires no warning labels compared to other insulation products. There are no VOC concerns when using UltraTouch, as it is safe for you and the environment.

With the highest ASTM testing standards for fire and smoke ratings, fungi resistance and corrosiveness, UltraTouch is a well-respected building material, no matter what the project.

While UltraTouch keeps chemical toxins out of your home, it also contains 85% post-industrial recycled materials, making it not only safe for your family but also great for the environment as a sustainable building material.

dB-3 Sound Air & Moisture Barrier

Virginia Foam Insulators is United Plastics distributor to contractors in the state of Virginia for commercial and residential grade dB-3 sound barriers. dB-3 sound barriers are designed for the construction phase of a project and are used in new wall and ceiling projects. dB-3 installs below the exposed surface during initial construction to reduce noise by up to 75% throughout the entire home. dB-3 blocks sound, air and moisture to create more peaceful homes, improve HVAC efficiency, and prevent mold and mildew. dB-3 is manufactured with recycled material and is 100% recyclable at end-of-life.

  • Dampen sound and reduce noise by up to 75%
  • Lightweight, easy-to-install—reduce labor and production costs
  • Utilized in ABC's "Extreme Makeover: Home Edition"

Perfect For Use In:

- Residential Applications

- Commercial Applications

- Apartments

- Condos

- Home Theater Rooms

- Bedrooms

- Music Rooms

- Home Offices

- Laundry Rooms

- Hotels

- Anywhere Noise is a Problem

Specs

- Thickness: Approximately 1/8" or less

- Available in 4'x 25' rolls and 4'x 8' sheets

- Weight: Approximately .75 lb/SF

dB-4looring Subfloor Application

Virginia Foam Insulators is United Plastics distributor to contractors in the state of Virginia for commercial and residential grade dB-4flooring for subfloor sound control solutions. dB-4looring is a cost-effective subfloor application that is easy to install with any style flooring - carpet, hardwood, vinyl and ceramic tile. Install dB-4looring and dampen both impact and airborne sound throughout homes, offices, apartments and condos. Create quieter living and working spaces, wall-to-wall, above and below the floor throughout the entire home or office.

dB-flooring is an Earth-smart product manufactured with recycled material and it is 100% recyclable at end-of-life.

  • Reduces airborne and impact noise by 75%
  • Build quieter structures with less material and labor
  • Air and moisture barrier for HVAC efficiency and mold and mildew prevention